1 2

New-Tech 550w 110 Volt Industrial Sewing Machine Servo Motor

New-Tech 550w 110 Volt Industrial Sewing Machine Servo Motor

NT-550W

New-Tech 550w 110 Volt Industrial Sewing Machine Servo Motor

$199.99
$199.99 Market price:
Sale Sold out
Delivery within 3-5 working days
View full details
  • Description
  • Specifications

New-Tech 550w 110 Volt Industrial Sewing Machine Servo Motor

Lower consumption of energy with higher output. Energy savings between 65-90% when compared to the clutch motor. Super high torque, up to 2.7NM, can drive heavy-duty industrial and commercial sewing machines. Motor stops immediately on pedal release with counter-clockwise break force. Less noise: 35 decibels, much quieter than a clutch motor! Less heat: less than 10 degrees centigrade means more comfortable working conditions. Less vibration: under .7mm/S2 Adjustable for clockwise or counter-clockwise operation Automatic overload protection

  • Voltage: 110-120V
  • Horsepower: 3/4
  • Power: 550 Watts
  • RPM: 4,500

U.S. WARRANTY:

90 Days labor on defects in materials and workmanship.

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.

CUSTOMERS ALSO BOUGHT

1 4