Mesh Grommets With Washers

Description
Specifications

Mesh Grommets With Washers (100 or 1000 sets)

Mesh grommets are often used for air ventilation of hats, shoes, tents, crafts and more. Ours are heavy duty brass quality, which will not rust and work great for products exposed to moisture.

AVAILABLE SIZES:

8.6 mm diameter, 4.5 mm inside hole diameter, 4.7 mm height
12 mm diameter, 6 mm inside hole diameter, 5 mm height
16 mm diameter, 10 mm inside hole diameter, 4.8 mm height

Available in Silver, Gold, Rose Gold, Gunmetal, Antique Copper and Antique Brass.

How to set a grommet/eyelet:

For smaller projects, our hammer and anvil setter; may work fine. For larger volume applications, you may want to consider our heavy duty press machine + appropriate die. We also offer hole cutting tools for pre-punching holes before you set your grommet. While not required -- especially for smaller sizes -- it can be helpful to cut perfect holes beforehand.

Sold in packs of 100 and 1000.

**Check out our grommet/eyelet sizing chart.

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.

Need a Custom Quote?

Mesh Grommets With Washers