1 1

Heavy Duty Grommet/Eyelet Pliers w/100 Grommets

Heavy Duty Grommet/Eyelet Pliers w/100 Grommets

NS-T0013

Heavy Duty Grommet and Eyelet Pliers w/100 Grommets

$19.99
$19.99 Market price: $39.99 Save 50%
Sale Sold out
Delivery within 3-5 working days
View full details
  • Description

Our heavy duty grommet setting pliers work great and include a built-in hole punch for pre-setting of grommets/eyelets on basic fabrics and materials. Includes 100 self-backing (no washers) 3/16" metal grommets*. Heavy-gauge steel, rust-resistant chrome finish.

Pliers work with the most common small grommets/eyelets, Size #000 (5/32") and Size #00 (3/16") only. If you need to set larger eyelets, please see our hammer/anvil setters or for larger, more professional applications, our heavy duty press machine with the appropriate die.

Choose grommet color in the pull-down menu.

Directions for use:

  1. Set depth on the hole punch
  2. Remove safety lock pin and save to replace for storage
  3. Mark wrong side of material for hole location (so clean cut is on the right side of the material.
  4. Trim off rough edges
  5. Place grommet in the hole. With grommet/eyelet on the nippled side of pliers jaw, squeeze.
  6. For use with grommets and washers, add the washer to the non-nippled side of the plier's jaw.

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.

CUSTOMERS ALSO BOUGHT

1 4