1 1

3-Needle 6.4MM Gauge Binder Presser Foot For Industrial Coverstitch Sewing Machines

3-Needle 6.4MM Gauge Binder Presser Foot For Industrial Coverstitch Sewing Machines

257321-A64

3-Needle 6.4MM Gauge Binder Presser Foot For Industrial Coverstitch Sewing Machines

$49.99
$49.99 Market price: $180.25 Save 72%
Sale Sold out
Delivery within 3-5 working days
View full details
  • Description

3-Needle 6.4MM Gauge Binder Presser Foot For Industrial Coverstitch Sewing Machines

Metric gauge size : 6.4mm (1/4") Spacing between left side needle to right side needle.

This Binder Presser Foot is used with binding attachment for sew binding. This foot has a left toe spring loaded compensating guide that guides the binding through the machine.

This high quality presser foot will fit most industrial coverstitch machines with 6.4mm gauge size including following models :

  • Artisan : VC-3500, ZJW122
  • Feiyue : FY007, GK-31016
  • Jack : JK-8500, JK-8600 series models
  • Juki : MF-860, MF-870, MF-890, MF-7200, MF-7500, MF-7700, MF-7900 series models
  • Kansai Special : V803F, W803F, DWK-1803F, W8103F, WX-8803, RX9803
  • Pegasus : W500, W600, W664, WS42, WS62, WS64, WT562
  • Siruba : F007
  • Sunstar : SC7200, SC7210, SC7300, SC7310, SF7400, SF7500 series models
  • Taiko : TK800F
  • Willcox & Gibbs : W41, W61, W62, W63, W542, W562, WS42, WS62, WS64, WT562
  • Yamato : DW1259, DW1359, VC2500, VC2700, VF2400, VF2500
  • Zoje : W562

And many more.

JUKI DDL-8700 FAQs

What kind of needles do you use in the DDL-8700?

The needles with your JUKI are the Organ DBx1, available on our website. This machine uses size 16×257, size 8 through 20 or 16×97. The 8700 can also use standard needles, sizes 9 through 21, universal or fabric-specific needles such as knit.

Where does the machine oil go?

A pan directly underneath the machine supplies oil to the machine with a cotton wick. Lift the machine up and over to access the oil tank while on the table. You must keep the machine’s oil level consistently at the «high» mark, either by adding more oil or draining it and refilling it as needed. If the oil pump can’t get the oil into the machine, it can cause serious problems later.

What kind of oil does this machine require?

You need a specific type, like motor oil in your car, to keep this machine running. The DDL-8700 requires JUKI New Defrix Oil No.1, equivalent to ISO VG7.

What size table can I get with this machine?

Our table has legs and is 22"w x 47"l. It includes a knee and foot pedals and a left-hand drawer for accessories.

Does the DDL 8700 make buttonholes?

No. The 8700 only does straight stitching, with a horizontal bar on the right side for a reverse stitch.

CUSTOMERS ALSO BOUGHT

1 4